Processing
Processing Capabilities
Slitting, decoiling, laser cutting, waterjet cutting, CNC bending, punching, and circle cutting — from coil and plate to parts ready for your production line.
8 mmMinimum slitting width
±0.1 mmLaser tolerance
80 mmMaximum plate cutting
Six Processes, One Supply Chain
| Process | Range | Tolerance / Note |
|---|---|---|
| Slitting | Width 8–1500 mm, 0.3–3 mm | Burr ≤ 0.05 mm on request; edge-trim loss honestly accounted (3–5% under 100 mm) |
| Decoiling / Cut-to-Length | Length up to 6000 mm | Squareness within 1 mm per meter |
| Laser Cutting | 3–20 mm | ±0.1 mm, edge quality per ISO 9013 |
| Waterjet Cutting | 5–80 mm | ±0.2 mm, no heat-affected zone — preferred for duplex |
| CNC Bending / Punching | Up to 4000 mm | Bending angle ±0.5°, quantity per drawing |
| Circle Cutting | Ø100–3000 mm | Burr-free, nesting-optimized to your disc size |
What We Need From You
- DXF or DWGFor cutting — PDF is accepted, but we will quote against a redrawn profile.
- Grade, Thickness, and Finish; if you are unsure, tell us the service conditions and we will recommend one.
- Quantity and Destination Port— this determines packaging (box, pallet, or bundle) and shipping.
We quote cutting cost separately from material, so you can compare "buy plate and cut locally" against "buy finished parts" with real numbers.
Need a Cutting Quote?
Send the drawing, grade, quantity, and destination port — we reply within 24 hours.